Weirdness

I recently became aware of something odd.  While working for the state I carried a Glock 23.  I had a lot of training on this model.  I own a 19.  It was my first ever Glock.  I have shot it a lot.  These guns are pretty much identical.  I shot the 23 better.  I don't know if this every registered with me, but it was true.

I was recently shooting.  I was helping someone get ready for her carry permit test.  After she was done, I took some time to shoot.  I shot about 50 rounds out of the 19.  Then I brought out my 30s and shot about 25 rounds out of it.  I shot way better with the 30s.

A couple of weeks later we went to a different range.  I shot my newest treasure, a CZ P-07.  This was my first non-striker fired handgun in 10 years.  I put about 100 rounds through it, first time out.  My son also fired about that many rounds out of it.  He shot fairly well, although I didn't have him fire any double-action shots from it.  I did a lot better than I expected with it.

I've never compared how I shoot the 19 against my 26 or 43.  I haven't formally set out to compare my performance with it to the 30s or any other firearm, but on casual inspection, I seem to shoot worse with it.  Which is alarming since it is my  carry gun except in the heat of summer, when I carry the 26 or 43.  This may change after some more trigger time with the CZ though.  It's similar in size,  a bit heavier, and a lot harder to accessorize, but it's more glove friendly and I like it.  I seem to shoot it well, even with the double action first shot.

Why would this be?  The 23 should be harder to shoot.  The 23 is supposed to have more recoil.  I never felt there was much difference in recoil between the 19 and 23.  It could be sights  The 23 had 3 dot night sights.  The 19 had standard Glock sights, until I switched it to XS big dots.  But the 30s is a shorter barrel, larger caliber, a bit fatter, and has the same XS sight set up.

Maybe I like bigger calibers?  But then why better with the CZ, which is also 9mm?  I don't have any idea.  But then I also have a sample size of 1.  I have only one 19, 30s, CZ, and no longer have access to the 23, but it was the only 23 I ever fired.

EDC ITEMS and a MAJOR UPDATE

Well first off, as of March 2017 I am no longer employed by the Department of Correction.  We parted ways rather unexpectedly and I was out of full time work for almost a year.  I then worked in a call center for abit, before being hired for my current job.  I am now working for a non-profit that tries to help troubled kids.  I am being certified as a family support specialist.  The money isn't as good, but the benefits are nearly identical to the state as we seem to have state/county employee status.  It's odd.  Anyway, I sleep better at night, enjoy going to work again, although to be fair I work out of a home office so the commute is short.  I still carry pretty much everyday, although I do sometimes have to disarm to enter certain places now.  I find myself carrying the glock 26 and 43 way more than the larger firearms.  I have taken to using an Uncle Mike's pocket holster for the 26, and occasionally for the Taurus PT111.  I use a Desantis pocket holster for the 43 a lot.  I picked up a 12 round magpul pmag for the 26.  The only new holsters I have added other than the pocket holsters are a Don Hume glock holster.  It fits all my glocks but the 43.  It will also hold the Taurus.  It's a great leather owb holster.  I also picked up a kydex iwb holster off ebay for the Taurus.  I don't carry it a lot but I do like to be prepared.

The main changes I have made have been with my accessories.  I think I am still allowed to carry a collapsible baton, but retired the mini baton I kept on my weak side for use in firearm retention.  I still carry my asp flashlight on a daily basis.  I carried the Benchmade Auto Stryker daily until I accidentally stretched the pocket clip for the second time.  This time it wouldn't go back, no matter what I did.  This is my third Benchmade and all 3 have had the same issue.  It's my fault, because I am catching them while exiting vehicles, mostly on seatbelts.  It's not happened on anything but Benchmades, but then except for the one Kershaw, I have been exclusively carrying Benchmade.

I did contact Benchmade and give them the model numbers of my knives and they are sending replacement clips at no charge, which is cool.  But I almost lost both my autos, so I decided to try something different.  First up was a SOG Spec Elite II.  It's a pretty nice little auto.  It's light and slim with a deep carry clip.  it really gets down into the pocket.  Not sure how fast I could retrieve it if I needed too.  I'm not a knife snob.  The blade steel isn't as good as a benchmade, but it has a good edge from the factory.  I rather like it.  I carry it a lot.  This is a blade hq pic of it.

When I was shopping there was another blade that caught my eye.  I had gone in to check for a SOG and I bought an SOG, but in the next case was this:

Spyderco Endura 4.  I had never owned an actual Spyderco.  I had a tiny Frost imitation a long time ago.  I remember it was all stainless and had a serrated blade.  As a first this might not have been the best choice.  It doesn't flip as well as some, although with some oil and adjusting the pivot screw, I can make it open fairly smoothly.  Apparently this model is just not the easiest opening one.  On the other hand it is a slicer.  It has a very nice 4" blade, but carries very nicely.  It's light and slender, and doesn't take up a lot of pocket real estate.

After awhile I realized the Spyder bug had bitten and aquired 2 more.

This is my main carry blade currently.  It's a little smaller than the Endura, but opens smooth as silk.  The handles are g-10 and very nice.  It carries great.  It's the Paramilitary 2.

One advantage of the Spydercos are they aren't assisted or autos, but open quickly.  This makes it more likely to be legal if I travel to another state that doesn't allow auto or assisted knives.  The first knife has about a 4 inch blade, which is the limit for my state.  This one is around 3.5 inches.

Somehow I also ended up with this little fellow.

It's a Manix 2.  It has translucent fiberglass reenforced nylon handles and a ball bearing lock.  This is similar to the axis lock on Benchmade.  It flips open pretty nice with a little adjusting.  It closes smoother than either of the other two, although the compression lock on the PM2 is my favorite of the locking systems.  The Manix hasn't been carried much yet.  It will though, it has a slighly shorter blade than the PM2.  The wire pocket clip carries deeper than the other 2 knives.

During the knife binge, ZT knives came across my path.  I ended up with 2.   They are assisted knives.  I find I like them, they are awesome knives.  Tough as you could ask a folding knife to be, but open like magic.  They do look a bit scary though.  Not the sort of thing you would want to whip out at a staff meeting to open the bag of candy.

This is the zt350ts.  It's actually got a shorter blade than most of my spyderco's but it's a heavy blade.  It takes up more space in the pockets than the Spydies too, but man it's cool.  It carries deep and has a flipper.  It's also available with a black or satin finish blade, I just wanted the tigerstripe blade.  This is a smaller version of the 300 series.  For a ZT is's compact.

The ZT 0566CF is a smaller version of the Hinder designed 560/561.  With a 3.25 inch blade it is also a smaller ZT.  I don't think it flips open as easy as the 350.  It is an assisted flipper, but I think the difference in blade weight may make a difference.  It carries well and has a deep carry pocket clip.

Oddly none of these knives have a either a tanto or wharncliffe style blade.